CERAMIC FILTER CLEANING INSTRUCTIONS
The flow rate of the ceramic filter can be easily renewed by simply brushing its outer surface with a soft toothbrush or soft Scotch-Brite¨ pad under running water. As the top layer of ceramic and the contaminants are brushed off and flushed away, a new layer becomes available. This process can be repeated over and over before the ceramic material is exhausted.
- Carefully remove the ceramic filter from the
upper chamber.
- Using a soft toothbrush or soft scouring pad
(3M Scotch-Brite® or similar), scrub the filter under
running water or in a bowl of water. Always brush
away from threaded mount, taking care not to
contaminate the mount. Never use soap or detergents.
- Replace the filter in the upper chamber.
Be sure that sealing washer is properly seated by turning nut until tight.
Note: Rubber gloves are suggested.
